Loading... Please wait...

Our Newsletter


Rapid Knowledge Base

Knowledgebase Home | Glossary | Favorites | Contact | Login Knowledgebase Home | Glossary | Favorites | Contact | Login
Search the Knowledgebase Browse by Category

[Advanced Search]
Remote Central Locking Custom Diagram
Article Details

Last Updated
11th of May, 2009
Would you like to...
Print this page Print this page
Email this page Email this page
Post a comment Post a comment
Subscribe me
Add to favorites Add to favorites
Remove Highlighting Remove Highlighting
Edit this Article Edit this Article
Edit this Article Quick Edit
Export to PDF
User Opinions (60 votes)
95% thumbs up 5% thumbs down
How would you rate this answer?
Helpful
Not helpful
Due to many request we have made a custom diagram for our old Central Locking System. Applies to old system only.
Visitor Comments
  1. Comment #1 (Posted by Angelo )
    Hi I got mazda 323 astina 98 model with factory central locking and wish to add remote .Is that posible and if you cen explain to me what will I need and how much will cost me to buy the necceseri parts.Thanks
  2. Comment #2 (Posted by michael )
    could you please email me a diagram on how to install keyless entry in a mitsibishi magna 1998 model already has central locking
  3. Comment #3 (Posted by Admin )
    Hi, such a diagram is included in the product you purchase. We also sell installation diagrams in our shop.
  4. Comment #4 (Posted by Wayne )
    Hi, if the central locking is connected like this how would opening the drivers side door by the barrel (master actuator) open the other doors. Is it possible to wire these keyless entry modules to do so using a master actuator with green, blue, grey, white and black wires.
  5. Comment #5 (Posted by Admin )
    Hi, this system does not have a master control. Yes, master control can be added, however the suitable system would be our remote central locking kit.
  6. Comment #6 (Posted by Wayne )
    Hi. Thanks for the reply. I am actually trying to replace the drives side actuator in the above circut with a master actuator I have containing the wires I stated above. Would you be able to provide me with the wiring to do so Thanks in Advanve
  7. Comment #7 (Posted by Admin )
    Hi, yes I could draw you a diagram however I would need accurate information. Is it our Keyless Entry System ? Are all the actuators after market or genuine ?
  8. Comment #8 (Posted by quocloi )
    hi, can you send diagram for me?
  9. Comment #9 (Posted by Admin )
    Which diagram?
  10. Comment #10 (Posted by Anonymous)
    thanks. diagram helped alot!
  11. Comment #11 (Posted by Ricky )
    I have just installed a keyless entry central locking to my 04 triton and it does not have the indicator flash for lock or unlock and was it possible place some relays in etc to the indicators to make them flash when buttons are pressed the kit is from repco called 386m remote central locking system. If this can be done could you please send me a diagram
  12. Comment #12 (Posted by Admin )
    Sorry, only our kits have this feature.
Post Comment for "Remote Central Locking Custom Diagram"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.
   Your Name:
   Email Address:
* Your Comment:
* Enter the code below:
 
Related Articles
Attachments
No attachments were found.

Rapid Electronics Knowledge Base