 Search the Knowledgebase |
 Browse by Category |
|
|
|
| Visitor Comments |
-
Comment #1 (Posted by Anonymous)
It would be really great to see how you finished off with the installation of the switches and binnacles.
-
Comment #2 (Posted by Peter
)
Aough it may become clear when i install my own drivers, i just wanted to know why the brackets were fixed on the out side of the door skin rather than inside? I'm worried that the bracket may prevent me from replacing the door coverings.
I too would like to see some photos of the finished project with switches installed. Otherwise. all else looks great & I look forward to installing one.
PS: Was the car used a Ford by any chance?
-
Comment #3 (Posted by Admin
)
Hi, it is a custom installation, they can be fitted however you like.
-
Comment #4 (Posted by Peter
)
Re: #3 - Admin
Thank you.. I was hoping that may've been the case.
-
Comment #5 (Posted by Norm
)
Just opened the box and laid out every thing on the floor to see what is what. 1st confusion was I couldn't figure out the wiring. The window switches didn't seem to make sense, but I figure it was prewired for a LHD car. I can change the plugs on the back of the switches of the master control to fix that. Not sure if I want the individual window switches, but they are necesary to complete each window wiring circuit. Everything else seems to be OK, so I'll start the installation in a couple of days.
|
| Attachments |
|
No attachments were found.
|
Loading... Please wait...
The article has been updated successfully.
